8.00am – 4.30pm, Mon - Fri
Price range: $135.00 through $208.00
Price range: $135.00 through $208.00
EU3 is not a flashy mat. It delivers what busy workshops actually need: predictable, stable behaviour day after day. It captures overspray efficiently, keeps airflow steady and gives you a booth that stays clean and consistent through the entire week.
EU3 is the go to exhaust mat when you want something simple, reliable and consistent. It performs well in most collision repair and refinish booths without collapsing or shedding.
The green side faces the spray area and loads overspray as it hits the media, while the bonded fibres help prevent sagging or early collapse. Shops that run EU3 like knowing the booth will behave the same on Friday afternoon as it did on Monday morning.
EU3 rolls are supplied into many Australian spray booth brands, including Lowbake and other common refinish booths.
Two roll widths cover most common spray booth exhaust frames. Measure your current frame width and match the closest roll size.
Quick answers for busy paint shops
Most workshops see around three to six weeks per roll, depending on booth load, paint volume and how hard the exhaust system is working. EU3 holds up well for standard refinish work without collapsing early.
Yes. EU3 roll widths match common Lowbake exhaust frames and many other Australian refinish booths. Measure your frame width and choose either the 760mm or 1000mm roll for the right fit.
The green side faces the spray area and the white side faces the outlet. Installing it this way makes sure overspray loads correctly and airflow stays stable throughout the week.
Yes. EU3 cuts cleanly with a sharp blade, so it is easy to trim for custom frames, doors, edge strips or unusual pit layouts.
For standard refinish work, EU3 is usually more than enough. If your booth runs very high volume or you want longer change intervals, step up to the USA Premium Paint Pocket Exhaust Filter for maximum overspray holding power and fewer stoppages.
Most shops upgrade the roof inlet filter at the same time. For a full roof change out with clean airflow from the top of the cabin down, the EU5 Roof Inlet Filter 4 Pack is the most common match for EU3 in Lowbake and refinish booths across Australia.
• Reliable all round exhaust filter used across Australian workshops
• Steady airflow that keeps booth pressure predictable
• Strong bonded fibres that resist sagging under load
• Good overspray holding capacity for day to day work
• Green spray side for easy, correct installation
• Cuts cleanly to fit standard and custom exhaust frames
Price range: $308.00 through $375.00
