Price range: $991.00 through $1,016.00
Price range: $991.00 through $1,016.00
EU5 is not a gimmick filter. It is a durable, progressive density inlet media built to cope with real booth conditions. Workshops use it because it stays cleaner for longer, resists sagging and keeps the booth behaving predictably on heavy spray days.
The EU5 Roof Inlet Filter is trusted in busy Australian spray booths for clean airflow, steady pressure and reliable daily performance. It keeps dust out of the cabin, supports cleaner laminar flow and helps painters get consistent results throughout the week.
Shops pick the EU5 4 pack when they want a full roof change out that restores clean airflow, reduces dust landing in fresh coats and holds up under high volume work.
EU5 uses a progressive density fibre structure to trap finer particles before they reach the job. The PE mesh adds strength so the mat stays flat, tight and effective across its whole life cycle, even in high temperature bake sessions.
EU5 roof inlet mats are widely used in Lowbake booths and are also supplied for many other spray booth brands across Australia, including:
If your booth uses a similar roof inlet frame, EU5 will usually fit once the size is matched correctly. Measure your frame and choose the closest mat size.
Two mat sizes are available to suit popular Lowbake style roof inlet systems. Measure your current frame opening and match the closest size.
Quick answers for busy paint shops
Measure the opening of your roof inlet frame and match it to the closest size listed on this page. Many booths follow Lowbake style dimensions and measuring the visible frame opening is the safest way to confirm the right fit.
Yes. EU5 can be trimmed slightly to suit older or non standard frames. Use a sharp blade and trim around the outer edge so the mesh and fibres still support the main airflow area.
Yes. EU5 captures fine dust before it reaches the cabin, which helps reduce surface nibs and gives painters a cleaner starting point for every job.
Service life depends on booth workload, paint usage and how clean you keep the cabin. Many shops find a full EU5 change out runs longer than standard inlet media. As a simple guide, plan a change when you see sagging across more than one section or a clear drop in cabin cleanliness.
Yes. Many workshops keep a full EU5 pack on the shelf and swap panels as needed. You can replace one section at a time as long as the remaining panels are still holding shape and the frame sizes match. If you prefer to order a single panel only, the EU5 Single Roof Inlet Panel is available.
Most workshops pair the EU5 with the USA Premium Paint Pocket Exhaust Filter. It’s our “most installed” spray both filter and can reduce filter change intervals up to 80%.
• Trusted by high volume spray booths across Australia
• Strong and steady airflow under heavy load
• High dust holding capacity for cleaner spray sessions
• Reinforced cabin side prevents sagging and shedding
• Progressive density fibre captures fine particles
• Supports cleaner finishes and fewer reworks
• Longer lasting than basic inlet media
• Fits common Lowbake booth sizes
Price range: $308.00 through $375.00
